BUNTING ECOP202620

Min. Order: 1 Piece

Bearing Price

$7.83 (Price for reference only.)
IN STOCK 500+ pcs.with 3 to 7 days delivery time

Our email: [email protected]

Bearing Information
Weight0.010 lb
OEMOEM P/N
Bearing manufacturers
Manufacturer Part Number
BUNTING ECOP202620

Bunting Bearings Llc Bunting&Reg; ECOP202620

UPC: 717905222467 | UNSPSC: 31171509 | GTIN:
Bearings > Plain & Sleeve Bearings > Plain Sleeve & Flanged Bearings

Bunting® Plain Sleeve Bearing, Series: ECO, 1-1/4 in Bore, 1-5/8 in OD, 1-1/4 in Width, 10 to 220 deg F, 2000 psi Maximum, 1200 sfpm Maximum Velocity, 50000 Maximum PV, Sintered Bronze Bearing, Powder Coated

Features:

  • Smooth housing bore chamfers reduce bearing installation time and eliminate press fit loss due to the shearing of metal from the bearing OD
  • Tooling for production of stamped housings should be designed to provide a radius edge which will act as a lead and furnish clearance for flange fillet
  • Sleeve cylindrical journal bearings are commonly installed by press fitting the bearing into a housing with an insertion arbor
  • For housings rigid enough to withstand the press fit without appreciable distortion and for bearings with thickness approximately one eighth of the bearing OD
  • Proper running clearance for bearings depends to a great extent on the particular application
  • Only minimum recommended clearances for oil-impregnated bearings used with ground steel shafting
  • Oil-impregnated units should be stored in suitable containers using plastic bags, wax paper, metal, glass
  • Properly stored and protected against dust, oil-impregnated bearings retain their oil supply

Specs:

  • Maximum PV Rating: 50000
  • Maximum Velocity: 1200 sfpm
  • Bearing Material: Sintered Bronze
  • Temperature Rating: 10 to 220 deg F
  • Maximum Pressure: 2000 psi
  • Bore Diameter: 1-1/4 in
  • Outside Diameter: 1-5/8 in
  • Finish: Powder Coated
  • Width: 1-1/4 in
  • Series: ECO

Certifications/Standards:

ANSI/ASQC Z1.4 | ASTM B438 | CBSA/NFFS/PTDA Association | MIL-B5687 Military Specification | OSHA Standard 29 CFR 1910.120 | SAE 841 | USDA H-1 Approved

Warranty:

90 Days